Three Things to Consider When Choosing a Servo Voltage Stabilizer

Janifha Evangeline

In India the electric power supply scenario is erratic and the voltage fluctuations are common & quiet high in our power lines. High voltage fluctuations may lead to severe damages to the industrial appliances & machinery. In general, any downfall in the voltage owing to inconsistent power supply will shoot up the electric current, and this will lead to burning of the appliance. Hence, factory owners, install Servo Voltage Stabilizers to not only efficiently manage the voltage fluctuations but also prevent any electric hazards.

Servo Stabilizers recognize the voltage fluctuations in the electric supply, regulate the fluctuations through electromagnetic regulators installed within an auto-transformer, ensured desired voltage & deliver a consistent range of output voltage. To ensure safety of the machines, a stabilizer comes with various ranges and is recommended as per the voltage fluctuations in a particular industrial area.

Selecting the right stabilizer that meets the requirements of your applications is crucial and following are the three important factors to look for when choosing the best servo voltage stabilizer.

Single phase or three phases

Your first concern should be to choose a single phase or three-phase servo stabilizer. Your electrical grid connection can help you in making this decision. In case of a 1-phase grid connection, buy a 1-phase voltage controller, whereas if you have 3 phase grid connection, then

choosing a 3-phase servo voltage stabilizer is the right choice.

Kilovolt-Ampere Rating

Kilovolt-Ampere or KVA is one of the most common ratings and experts use it for the power output of a power generator. The higher the KVA rating, the more power the generator can bear the load. You are required to determine the size of the servo voltage stabilizer & this can be done based on its size & by measuring the total load in amps post you switch on your full load.

In order to get the right KVA rating it is advisable to prepare a list of all electronic appliances & machinery at either your industry. Record their KVA rating & then, the total KVA for all the machines together & show this to the Servo Voltage Stabilizer Manufacturer and they can offer the right product that matches your specification.

Overload protection

The overload protection feature is a critical specification the servo voltage stabilizer possesses. It helps by indicating the overload & turns off the stabilizer output if there is either any short circuit or any type of burn-out owing to the overload. Several select Servo Voltage Stabilizer Manufacturers enterprises render three to five years of warranty against their product, and this lets safe & sufficient protection for appliances. It is advisable to go for a stabilizer that has been built especially for home use. For industry use, a commercial stabilizer is one of them.

The standard output voltage ranges between 380 & 415 V AC. Prior to choosing a stabilizer, it is important to check the voltage requirements of your machine. While there are a few which require 380 voltage, the others require 400 voltage & several others that require 415 voltage. However, the best option is 400 Voltage & it can either be increased or decreased according to the requirements. Select Servo Voltage Stabilizer which features to adjust the output voltages between 380 & 415 V AC.

Therefore, for choosing the right Select Servo Voltage Stabilizer, it is important to check the voltage, power as well as current rating of the device and the standard device voltage in India is 230VAC, 50Hz.

As per a recent report, the India voltage stabilizer market is anticipated to reach USD 550 million by end of this year and the major factors bolstering the growth of this market include the surge in government focus on development of smart cities & investments made under the 'Make in India' and 'Invest India' initiatives.