| |MAY 20223FLUID Conventional coil designFLUIDBAC's advanced coil designBLUE by nature GREEN at heartBAC'S PATENTED COMBINED FLOW TECHNOLOGY GUARANTEES LIFE TIME COOLING TOWER PERFORMANCEOptimal thermal performance Easy inspection and maintenanceMaximum coil life by reduced scalingADVANCED COIL TECHNOLOGYBAC's cooling towers with a combined flow technology make use of an advanced coil design. · The spray water loading (l/s per m²) over the coil bundle using BAC's advanced coil design is typically 3 to 4 times higher compared to a conventional fluid cooler. · The coil tubes are covered by a thick water film, which minimizes the risk for dry spots and drastically reduces the risk for fouling. · Air and spray water are in parallel flow, which results in better water coverage. The evaporation primarily occurs on the fill, minimizing the scaling risk of the coil.The combined flow technology (coil on fill) allows inspection of fill and water distribution during operation.COMBINED FLOW TECHNOLOGY The combined flow technology (coil on fill) optimizes the sensible heat transfer of the coil by cooling the spray water (typically 4 to 7°C) over the cross flow fill. In combination with the parallel airflow a cooling tower with combined flow technology can cool to lower temperatures than the spray water temperature. This makes it more efficient than a conventional cooler.www.BaltimoreAircoil.euinfo@BaltimoreAircoil.eu
< Page 2 | Page 4 >